Creates or updates the data sources that are defined by properties files. The properties files will be processed for property replacement using ${{VARIABLE_NAME}} format. See Property Replacement Support for more information about property replacement.
If using multiple files, make sure that the lists contain unique values across files. Best practice would be to use the WebLogic DataSource Name as the list identifier for datasources.
If you want to detect changes in WebLogic resource (properties) files and only deploy changed files, you can implement custom workflow as defined in Custom Workflow to detect changes in Properties Files.
Blog Posts
Target Properties
Property Name | Property Code | Required | Description |
|---|---|---|---|
Oracle Weblogic Home (WL_HOME) |
| Yes | WebLogic Home Directory. (e.g. /u01/oracle/products/fmw/wlserver) |
Weblogic Domain Name |
| Yes | WebLogic Domain Name. |
Weblogic Admin Listen Address |
| Yes | The listener address of the WLS admin server. (e.g. localhost) |
Weblogic Admin Listen Port |
| Yes | The port of the WLS admin server. (e.g. 7001) |
Weblogic Admin SSL Connection |
| No | Indicates whether the admin server is using SSL. |
Weblogic Admin User |
| Yes | The username for the WLS admin server. |
Weblogic Admin Password |
| Yes | The password for Weblogic Admin User. |
Weblogic Admin Domain Directory |
| No | Weblogic Domain Directory for AdminServer. If not provided, Weblogic Domain Directory will be used. |
Weblogic Domain Directory |
| Yes | Weblogic Domain Directory.(e.g. |
Inputs
Property Name | Property Code | Required | Description |
|---|---|---|---|
Properties File Path |
| No | Comma-separated list of paths to the properties file(s). |
Outputs
Output Name | Required | Description |
|---|---|---|
| No | A |
Artifacts
This operation consumes properties-file artifacts.
Endpoint Selection
This operation will select all available endpoints associated to the Target which have a resource type of WLS Admin Server. Since the admin server only runs on one server, it is expected that for a given domain, there will only be one endpoint with a resource type set to WLS Admin Server
Endpoint Execution
This operation will execute on the Admin Server endpoint selected using the WLS Admin Server resource type.
Special Considerations
If Properties File Path is not specified, the FD_ARTIFACTS_DIR folder will be used. If a relative path is specified, the path will be relative to the FD_ARTIFACTS_DIR directory.
WebLogic configuration files including Data Sources are backed up to FD_TEMP_DIR/configbackup before modifications. As with all files in the endpoint working directory, these files will be saved for 3 days before being deleted.
It is important to set up the properties files like the examples below.
Example Folder Structure
Properties file can be named as per your requirements. See Example Properties File below.
datasources.properties – This is the main properties file. The path to it is referenced by the Properties File Path input.
DEV/datasources.properties - optionally create a file here and override some properties with it per environment. The filename must match.
PROD/datasources.properties - optionally have several environments.
Sub folder names for environment overrides must be FlexDeploy environment code.
Example Property File
This sample file defines two simple data sources with a sub-set of the available properties.
Backslash in Properties file
If you want \ (backslash) in any property value, use \\ or \u005c. This is Java properties file load syntax.
DSList=DS1,DS2
DS1.DataSourceType=Generic
DS1.URL=jdbc:oracle:thin:@localhost:1521:xe
DS1.ConnectionClass=oracle.jdbc.OracleDriver
DS1.DSName=DS1
DS1.User=${{FLX_DB_USER_FDADMIN}}
DS1.Targets=MS1
DS1.JNDINames=jdbc/DS1
DS1.Password=${{FLX_DB_PASSWORD_FDADMIN}}
DS1.MinCapacity=0
# This format is also supported for datasource properties.
DS1.properties.oracle.net.CONNECT_TIMEOUT=30000
DS2.DataSourceType=Generic
DS2.URL=jdbc:oracle:thin:@localhost:1521:xe
DS2.ConnectionClass=oracle.jdbc.OracleDriver
DS2.DSName=DS2
DS2.User=${{FLX_DB_USER_FDADMIN}}
DS2.Targets=MS1
DS2.JNDINames=jdbc/DS2
DS2.Password=${{FLX_DB_PASSWORD_FDADMIN}}
DS2.MinCapacity=0
# This format is also supported for datasource properties.
DS2.properties.key1=value1
DS2.properties.key2=value2
DS2.systemProperties.key3=value3
DS2.systemProperties.key4=value4
Example Gridlink DataSource Property File
This sample file defines a GridLink data source with a sub-set of the available properties. It could be combined with other data sources in one file but is separate here for clarity.
DSList=testName1 testName1.DataSourceType=GridLink testName1.ConnectionClass=oracle.jdbc.OracleDriver testName1.DSName=testName1 testName1.Targets=AdminServer testName1.JNDINames=test/karl1 testName1.TestConnectionsOnReserve=true testName1.URL=jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=databaseserverhostname)(PORT=1521)))(CONNECT_DATA=(SID=fmt01))) testName1.DatabaseName=fmt01 testName1.User=system testName1.Password=***** testName1.InitialCapacity=0 testName1.MaxCapacity=50
Properties File Format
Multiple data sources can be defined in the properties files. The properties files must start with a list of data sources present in the format DSList=ds1,ds2,ds3. Change ds1, ds2, ds3 to names that make sense for your project. Any number of data sources is acceptable. The properties files will be processed for property replacement using ${{VARIABLE_NAME}} format. See the Appendix for more information about property replacement.
If using multiple files, make sure that the lists contain unique values across files. Best practice would be to use the Weblogic Datasource Name as the list identifier for datasources.
Required Properties for Generic and Gridlink Datasources
At a minimum, each data source must contain these properties:
Property Name | Description |
|---|---|
DataSourceType | Generic or GridLink (GridLink is supported on WebLogic 12c+ only) |
URL | The full JDBC connection URL |
ConnectionClass | The JDBC driver |
DSName | The display name of the Data Source |
User | Database username |
Password | Database Password |
JNDINames | Comma-separated list of JNDI names. (e.g. |
Required Properties for Multi Data Source DataSources
At a minimum, each data source must contain these properties:
Property Name | Description |
|---|---|
DataSourceType | MultiDataSource |
DSName | The display name of the Data Source |
JNDINames | Comma-separated list of JNDI names. (e.g. |
DataSourceList | Comma-Separated list of DataSource display names (DSName property of those datasources) |
Optional Properties for Generic and Gridlink DataSources
These properties are optional. If the property is unsupported by the version of WebLogic you are running, it will be ignored. If not specified in your properties file, the WebLogic 12c defaults shown below will apply. This is also true on updating databases, so it is important to include all the properties you use if modifying an existing environment. You may use as many or as few as you like per data source.
Property Name | Defaults |
|---|---|
ConnectionCreationRetryFrequencySeconds | 0 |
ConnectionHarvestMaxCount | 1 |
ConnectionHarvestTriggerCount | -1 |
ConnectionLabelingCallback | Property is unset if not specified. |
ConnectionReserveTimeoutSeconds | 10 |
CountOfRefreshFailuresTillDisable | 2 |
CountOfTestFailuresTillFlush | 2 |
CredentialMappingEnabled | false |
DRCPConnectionClassProperties | Property is unset if not specified. This is required for pooled connections and ignored on non-pooled connections. |
FanEnabled | True if Gridlink, False if Generic |
FatalErrorCodes | Property is unset if not specified. |
GlobalTransactionsProtocol | The default is OnePhaseCommit If you would like to uncheck the Supports Global Transactions checkbox, set the value to None. The options are : OnePhaseCommit, None, LoggingLastResource, EmulateTwoPhaseCommit, TwoPhaseCommit |
HighestNumWaiters | 2147483647 |
IdentityBasedConnectionPoolingEnabled | false |
IgnoreInUseConnectionsEnabled | true |
InactiveConnectionTimeoutSeconds | 0 |
InitialCapacity | 1 |
InitSql | Property is unset if not specified. |
KeepConnAfterGlobalTx | false |
KeepConnAfterLocalTx | true |
KeepLogicalConnOpenOnRelease | false |
KeepXaConnTillTxComplete | true |
LoginDelaySeconds | 0 |
MaxCapacity | 15 |
MinCapacity | 1 |
NeedTxCtxOnClose | false |
OracleProxySession | false |
Partition | Property is unset if not specified. |
PinnedToThread | false |
RecoverOnlyOnce | false |
RemoveInfectedConnections | true |
ResourceGroup | Property is unset if not specified. |
ResourceHealthMonitoring | true |
RollbackLocalTxUponConnClose | false |
SecondsToTrustAnIdlePoolConnection | 10 |
ShrinkFrequencySeconds | 900 |
StatementCacheSize | 10 |
StatementCacheType | LRU |
StatementTimeout | -1 |
Targets | Property is unset if not specified. Provide comma-separated list of target names. e.g. DefaultServer, Cluster1, Server2, Server3. |
TestConnectionsOnReserve | false |
TestFrequencySeconds | 120 |
TestTableName | SQL ISVALID\r\n |
UseDatabaseCredentials | false |
UseXaDataSourceInterface | true |
WrapTypes | true |
XaEndOnlyOnce | false |
XaRetryDurationSeconds | 0 |
XaRetryIntervalSeconds | 60 |
XaSetTransactionTimeout | false |
XaTransactionTimeout | 0 |
Optional Properties for GridLink DataSources
These properties are used only for GridLink DataSources.
Property Name | Defaults |
|---|---|
OnsNodeList | Property is unset if not specified. |
OnsWalletFile | Property is unset if not specified. |
OnsWalletPassword | Property is unset if not specified. |
Optional Properties for Multi Data Source DataSources
These properties are used only for Multi Data Source DataSources.
Property Name | Defaults |
|---|---|
Notes | Property is unset if not specified. |
FailoverRequestIfBusy | false |
ConnectionPoolFailoverCallbackHandler | Property is unset if not specified. |
AlgorithmType | Failover |
TestFrequencySeconds | 120 |
Targets | Property is unset if not specified. Provide comma-separated list of target names. e.g. DefaultServer, Cluster1, Server2, Server3. |