Endpoints can be accessed and modified through this API using four services: GET, POST, PUT, and PATCH. These four services allow for the retrieval, creation, complete update, and partial update of endpoints.

...

If we had an endpoint in our database with an Id of 13901 and had the following attributes

Code Block

theme	Eclipse
title	Endpoint 13910

{
    "passwordCredentialId": 12345,
    "description": "description",
    "userName": "userName",
    "privateKey": "privateKey",
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "GOODPOST1",
    "connectionType": "SSH",
    "endpointAddress": "NotNeeded00",
    "endpointId": 13910,
    "endpointSubgroup": "subGroupTester",
    "endpointPort": "1",
    "endpointGroup": "endpointGroup",
    "runAsUserName": "TestInput",
    "osType": "UNIX",
    "javaPath": "ServerJavaHome",
    "passphrase": "Passphrase",
    "passphraseCredentialId": 54321
}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/13901

The GET request would return the following JSON endpoint object

Code Block

theme	Eclipse
title	Endpoint GET Return JSON

{
    "password": "*****",
    "passwordCredentialId": 12345,
    "description": "description",
    "userName": "userName",
    "privateKey": "privateKey",
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "GOODPOST1",
    "connectionType": "SSH",
    "endpointAddress": "NotNeeded00",
    "endpointId": 13910,
    "endpointSubgroup": "subGroupTester",
    "endpointPort": "1",
    "endpointGroup": "endpointGroup",
    "runAsUserName": "TestInput",
    "osType": "UNIX",
    "javaPath": "ServerJavaHome",
    "passphrase": "*****",
    "passphraseCredentialId": 54321
}

GET (Using Query Parameters)

This GET service will return a list of Endpoints in the form of JSON objects based on the query parameters name, address, group and subgroup. Endpoints are only returned if they match ALL of the specified query parameters. If no query parameters are given this request will return the entire list of Endpoints.

Info

title	API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint?

Append the following character sequences to the above URL to specify Query parameters.

Use '&' between successive query parameters:

endpointName={name}

endpointAddress={address}

endpointGroup={group}

endpointSubgroup={subgroup}

Examples:

To Specify the name parameter only:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}

To Specify the name and group parameters:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}&endpointGroup={group}

To Specify the name, address and group parameters:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}&endpointAddress={address}&endpointGroup={group}

...

If we had an endpoints in our database with a Ids of 14517, and 14518 and the following attributes

Code Block

language	js
theme	Eclipse
title	Endpoint - 14517

{
    "description": null,
    "passwordCredentialId": null,
    "userName": null,
    "isActive": true,
    "privateKey": null,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "osType": null,
    "javaPath": "ServerJavaHome",
    "endpointName": "Motel6",
    "endpointAddress": "localhost",
    "endpointId": 14517,
    "passphrase": null,
    "passphraseCredentialId": null,
    "connectionType": "LOCALHOST",
    "endpointPort": null,
    "endpointGroup": "Germany",
    "endpointSubgroup": "Munich",
    "runAsUserName": null
}

Code Block

theme	Eclipse
title	Endpoint 14518

{
    "description": null,
    "password": null,
    "passwordCredentialId": null,
    "userName": null,
    "isActive": true,
    "privateKey": null,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "osType": null,
    "javaPath": "ServerJavaHome",
    "endpointName": "Raddison Hotel",
    "endpointAddress": "localhost",
    "endpointId": 14518,
    "passphrase": null,
    "passphraseCredentialId": null,
    "connectionType": "LOCALHOST",
    "endpointPort": null,
    "endpointGroup": "Germany",
    "endpointSubgroup": "Berlin",
    "runAsUserName": null
}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointGroup=Germany

The GET request would return the following JSON endpoint object

Code Block

theme	Eclipse
title	Endpoint GET Return JSON

[
    {
        "description": null,
        "password": null,
        "passwordCredentialId": null,
        "userName": null,
        "isActive": true,
        "privateKey": null,
        "baseDirectory": "ServerInstallRoot + '/localhost'",
        "osType": null,
        "javaPath": "ServerJavaHome",
        "endpointName": "Motel6",
        "endpointAddress": "localhost",
        "endpointId": 14517,
        "passphrase": null,
        "passphraseCredentialId": null,
        "connectionType": "LOCALHOST",
        "endpointPort": null,
        "endpointGroup": "Germany",
        "endpointSubgroup": "Munich",
        "runAsUserName": null
    },
    {
        "description": null,
        "password": null,
        "passwordCredentialId": null,
        "userName": null,
        "isActive": true,
        "privateKey": null,
        "baseDirectory": "ServerInstallRoot + '/localhost'",
        "osType": null,
        "javaPath": "ServerJavaHome",
        "endpointName": "Raddison Hotel",
        "endpointAddress": "localhost",
        "endpointId": 14518,
        "passphrase": null,
        "passphraseCredentialId": null,
        "connectionType": "LOCALHOST",
        "endpointPort": null,
        "endpointGroup": "Germany",
        "endpointSubgroup": "Berlin",
        "runAsUserName": null
    }
]

Test (using GET)

Info

title	API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/test

This GET service will test an Endpoint with the given Id and return the JSON representation of a test result.

Request

Parameter	Required	Type	Description
Id	Yes	URL	This is a URL parameter for the Id which is used to find and return an Endpoint

Include Page

	REST V1 Testresult Response
	REST V1 Testresult Response

Response Codes

HTTP Code	Description
200	Search successful and results returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
500	Unexpected internal server error

Example

Assuming we have an endpoint setup like the following, and it is a valid endpoint

Code Block

theme	Eclipse
title	Endpoint 13910

{
    "passwordCredentialId": 12345,
    "description": "description",
    "userName": "userName",
    "privateKey": "privateKey",
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "GOODPOST1",
    "connectionType": "SSH",
    "endpointAddress": "hostname:port",
    "endpointId": 13910,
    "endpointSubgroup": "subGroupTester",
    "endpointPort": "1",
    "endpointGroup": "endpointGroup",
    "runAsUserName": "TestInput",
    "osType": "UNIX",
    "javaPath": "ServerJavaHome",
    "passphrase": "Passphrase",
    "passphraseCredentialId": 54321
}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/test/13901

The GET request would return the following JSON testresult object

Code Block

theme	Eclipse
title	Testresult

{
    "message": "Test was successful",
    "successful": true
}

POST

...

Attributes	Type	Required	Description
description	String	No	A description of the Endpoint.
connectiontype	String	Yes	This specifies the connection Type. "SSH" or "LOCALHOST"
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	Dependent	This is a port associated with an SSH connection. Dependency: Mandatory when connectionType is "SSH", otherwise not used.
password	String	Dependent	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	Dependent	This is the id of the credential associated with the endpoint password. Dependency: Either passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
privateKey	String	Dependent	Fully-qualified path of the SSH private key file. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
osType	String	Dependent	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Dependency: Mandatory when connectionType is "SSH" otherwise not used.
baseDirectory	String	Yes	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
javaPath	String	Yes	This is a character sequence that specifies the java path of the corresponding Endpoint. Not required if the Endpoint is a Docker Host.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.

Include Page

	REST V1 Endpoint Response
	REST V1 Endpoint Response

Response Codes

HTTP Code	Description
200	Endpoint was found and returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
500	Unexpected internal server error

...

Request

Attributes	Type	Required	Description
Id	URL	Yes	URL parameter to specify which endpoint to replace
description	String	No	A description of the Endpoint.
connectiontype	String	Yes	This specifies the connection Type. "SSH" or "LOCALHOST"
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	Dependent	This is a port associated with an SSH connection. Dependency: Mandatory when connectionType is "SSH", otherwise not used.
password	String	Dependent	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	Dependent	This is the id of the credential associated with the endpoint password. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
privateKey	String	Dependent	Fully-qualified path of the SSH private key file. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
osType	String	Dependent	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Dependency: Mandatory when connectionType is "SSH" otherwise not used.
baseDirectory	String	Yes	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
javaPath	String	Yes	This is a character sequence that specifies the java path of the corresponding Endpoint. Not required if the Endpoint is a Docker Host.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.

Include Page

	REST V1 Endpoint Response
	REST V1 Endpoint Response

Response Codes

HTTP Code	Description
201	Endpoint was created successfully
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found
500	Unexpected internal server error

...

Code Block

theme	Eclipse
title	Endpoint PUT Return JSON

{
   "description": "newDescription",
   "userName": "newUserName",
   "password": "newPassword",
   "passwordCredentialId": 74839,
   "isActive": true,
   "privateKey": "newPrivateKey",
   "endpointName": "GoodPost3",
   "osType": "UNIX",
   "connectionType": "SSH",
   "javaPath": "ServerJavaHome",
   "endpointAddress": "endpointAddress",
   "baseDirectory": "ServerInstallRoot + '/localhost'",
   "passphrase": "passphrase",
   "passphraseCredentialId": 29084,
   "endpointId": null,
   "endpointGroup": "endpointGroup",
   "endpointPort": null,
   "runAsUserName": "runAsUserName",
   "endpointSubgroup": "endpointSubgroup"
}

PATCH

This PATCH service will update an existing endpoint with the information passed through a JSON object. If an attribute is not provided, it will not be updated in the Endpoint.

Info

title	API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/{Id}

...

Attributes	Type	Required	Description
Id	URL	Yes	URL parameter to specify which endpoint to patch
description	String	No	A description of the Endpoint.
connectiontype	String	No	This specifies the connection Type. "SSH" or "LOCALHOST"
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	No	This is a port associated with an SSH connection. Note: Only applicable when connectionType is "SSH", otherwise not used.
password	String	No	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	No	This is the id of the credential associated with the endpoint password. Note: Only applicable when connectionType is "SSH" otherwise not used.
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
privateKey	String	No	Fully-qualified path of the SSH private key file. Note: Only applicable when connectionType is "SSH" otherwise not used.
osType	String	No	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Note: Only applicable when connectionType is "SSH" otherwise not used.
baseDirectory	String	No	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified, or already configured for endpoint.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
javaPath	String	No	This is a character sequence that specifies the java path of the corresponding Endpoint.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.

Include Page

	REST V1 Endpoint Response
	REST V1 Endpoint Response

Response Codes

HTTP Code	Description
200	Endpoint was found and updated
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found
500	Unexpected internal server error

...

Versions Compared

Old Version 53

New Version 54

Key

GET (Using Query Parameters)

Append the following character sequences to the above URL to specify Query parameters.

Use '&' between successive query parameters:

Examples:

To Specify the name parameter only:

To Specify the name and group parameters:

To Specify the name, address and group parameters:

Test (using GET)

Request

Response Codes

Example

Response Codes

Request

Response Codes

PATCH

Response Codes

Page Comparison

Versions Compared

Old Version 53

New Version 54

Key

GET (Using Query Parameters)

Append the following character sequences to the above URL to specify Query parameters.

Use '&' between successive query parameters:

Examples:

To Specify the name parameter only:

To Specify the name and group parameters:

To Specify the name, address and group parameters:

Test (using GET)

Request

Response Codes

Example

Response Codes

Request

Response Codes

PATCH

Response Codes