Sample Webhook Listeners

Below are some sample Webhook Listener use cases and how to implement them.

The Default Listener (POST Webhook)

When creating a new Listener, the script will default to the below which simply forwards the payload via a REST Post request. This script emulates an outbound webhook in the truest sense since no payload modification or logic is done. Simply update the postUrl variable with your endpoint and its ready to go.

Example Groovy Code

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "myListener";
LOG.info("Running listener: ${listenerName}");

def postUrl = "";
def responseCode = REST.forward(postUrl,EVENT);

LOG.setMessage("Message forwarded (${responseCode}) to ${postUrl}");

End Release After Snapshot Deploys to Production

To take advantage of ending a release after a pipeline execution completes you can create a new listener and select the Pipeline Stage Completed. You will then need to check whether the completed stage is the final stage in the pipeline. You can do this in a number of ways. One way is shown below by checking the environment code and comparing it to our final PROD stage.

Example Groovy Code

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "endReleaseListener";
LOG.info("Running listener: ${listenerName}");
         
if(EVENT.payload.environment.environmentCode.equals("PROD")){
     LOG.setMessage("Release ${EVENT.payload.release.releaseName} has completed moving through the pipeline. Ending release.");
     FLEXDEPLOY.endRelease(EVENT.payload.release.releaseId);
}

Another way to take advantage of this is to use the Webhook Listener’s filter. This filter is also groovy script where you can determine whether the event should be processed by the Listener. In this example, we will filter the events so that only pipeline stage completed events that have completed the Prod stage in the pipeline are allowed through.

Logically, both approaches will accomplish the same task, however, using the Filter will automatically hide it from the Outgoing Webhook Messages display. This will reduce some of the noise and allow you to easily find the messages you care about.

Pipeline Stage Completed Filter

if(!EVENT.payload.environment.environmentCode.equals("PROD")){
  return false;
}else{
  return true;
}

Send a Slack Notification After Approval Task Is Created

This will send a notification to the specified slack channel when an approval task is created. To implement this you will simply need to set up your Slack Messaging Account and add a short script to your listener. In this example we are filtering for APPROVAL tasks only.

For a more comprehensive overview of how you can integrate Slack with your FlexDeploy Approval process check out this blog

TaskCreated Script

//Carry out any custom action you wish for this event. Check out the snippets for reference or ideas.
def listenerName = "TaskCreated";
LOG.info("Running listener: ${listenerName}");

def channel = 'testing';

//Slack account code defined in Topology->Integration->Messaging
def account = 'SLACK';

//Create and post a FlexDeploy Slack Message object with interactive buttons to approve/reject
def message = SLACK.makeTaskCreatedMessage(EVENT.payload,true);
def tsId = SLACK.postMessage(account,channel,message);

LOG.setMessage("Posted task ${EVENT.payload.taskId} to Slack");

TaskCreated Filter

return EVENT.payload.taskType == "APPROVAL";

Attach Failed Plugin Logs to Jira Issue

One of the bigger use cases of the Workflow Completed event is to send the logs to another application. In this particular example we are uploading the logs to the Jira Issue associated to the project. We also have a filter setup to only execute this listener for workflows with a ‘FAILURE’ status and when the Workflow Execution has Jira Issues associated.

This script uses FLEXDEPLOY.getIntegrationInstance to get a configured Jira instance within FlexDeploy. This is a great alternative to putting a plain text password in the script

Upload Logs Jira Listener Script

import flexagon.ff.common.core.exceptions.FlexCheckedException;

//Carry out any custom action you wish for this event. Check out the snippets for reference or ideas.
def listenerName = "Upload Logs To Jira";
LOG.info("Running listener: ${listenerName}");

//Prior to 5.4.0.1 this function only returned a list of input streams. Update accordingly
//The second argument specifies we only want the error streams returned.
def streams = FLEXDEPLOY.getPluginLogInputStreams(EVENT.payload.workflowExecutionId, true);

//upfront validation on streams
if(!streams || streams.size() == 0) {
  LOG.logMessage("Received failure event but couldn't find any plugin log streams");
  return;
}

//We should only ever have one errored plugin execution, so grab first entry.
def failedPlugin = streams.entrySet().iterator().next();

//create our form data body
def body = REST.getClient().createFormDataWithInputStream(['file': failedPlugin.getValue()], "${failedPlugin.getKey()}.txt");

def properties = getJiraProperties('JIRA');

LOG.info("${EVENT.payload.issueNumbers}");

for(def issue: EVENT.payload.issueNumbers) {
  LOG.info("Upload logs to issue: ${issue}");
  
  //send request
  def client = REST.getClient().url(properties.url).addHeader('X-Atlassian-Token', 'no-check').basicauth(properties.user,properties.password);
  def response = client.path("/rest/api/2/issue/${issue}/attachments").post(body);
  LOG.setMessage("Uploaded logs to ${issue}. Response: ${response.getResponseCode()}");
}

//helper function to get jira properties from integration instance
def getJiraProperties(String code) {
  def instance = FLEXDEPLOY.findIntegrationInstance(code,'ITS');
  def properties = instance.getProperties();
  def url = properties.find { it.getPropertyName() == 'JIRA_URL' }.getPropertyValue();
  def user = properties.find { it.getPropertyName() == 'JIRA_USER_NAME' }.getPropertyValue();
  def password = properties.find { it.getPropertyName() == 'JIRA_PASSWORD' }.getPropertyValue();
  return ['url':url, 'user': user, 'password': password];
}

The next step is to set up our filter to only process failed workflow completed events with Jira issue numbers.

Workflow Completed Filter

return "FAILURE".equals(EVENT.payload.executionStatus) && EVENT.payload.issueNumbers.size() > 0;

Create ServiceNow Incident on Workflow Failure

In the below example we make use of the ChangeManagementSystemService to allow us to create an incident through FlexDeploy’s internal ServiceNow integration. The only thing that needs to be configured ahead of time is your ServiceNow instance in Topology->Integrations->ChangeManagement

Create Incident Script

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "Create Incident";
LOG.info("Running listener: ${listenerName}");

//throws FlexNotFoundException if SERVICENOW is not found
def cmsService = FLEXDEPLOY.findCMSService("SERVICENOW",null)

def cmsFields = [:];
cmsFields.short_description = "Deployment failed for ${EVENT.payload.project.projectName}";
cmsFields.description = "Deployment failed for ${EVENT.payload.project.projectName}. Environment ${EVENT.payload.environment.environmentName} executionid ${EVENT.payload.workflowExecutionId} requestor ${EVENT.payload.updatedBy}";
 
LOG.fine("Creating Service Now Incident ${cmsFields}");

def cmsObject = cmsService.createIncident(EVENT.payload.workflowRequest.workflowRequestId, cmsFields);
LOG.setMessage("Successfully created Service Now Incident ${cmsObject.getNumber()}");

Configured offscreen is a Filter script for only failed workflows.

Send Test Results to Teams

The Workflow Completed Event includes all of the test execution data for any TEST workflow type. The below example shows how this data can be used by sending a Teams message with the data neatly formatted in an html table.

Tests Completed Script

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "Tests Completed";
LOG.info("Running listener: ${listenerName}");

def builder = new StringBuilder();
builder.append("<h1 style=\"padding: 10px 0\">Tests ${EVENT.payload.testRun.runStatus} for ${getProjectLink(EVENT.payload.project.projectName, EVENT.payload.project.projectId)} in ${EVENT.payload.environment.environmentName}</h1>");

builder.append("<table><tr><th style=\"padding: 0 10px 5px 0\">Test Def Name</th><th style=\"padding: 0 10px 5px 0\">Testing Tool</th><th style=\"padding: 0 10px 5px 0\">Test Case Name</th><th style=\"padding: 0 10px 5px 0\">Status</th></tr>");

EVENT.payload.testRun.testSets.each{ testSet ->
  LOG.fine("Processing test set ${testSet.name}");
  
  testSet.testDefinitions.each{ testDef ->
    LOG.fine("Processing test def ${testDef.name}");
    
    def testDefName = testDef.name;
    def testingTool = testDef.testingTool;
    
    testDef.results.each{ testResult -> 
      def testCaseName = testResult.testCaseName;
      def status = testResult.status;
      
      builder.append("<tr><td style=\"padding-right: 10px\">${testDefName}</td><td style=\"padding-right: 10px\">${testingTool}</td><td style=\"padding-right: 10px\">${testCaseName}</td><td style=\"padding-right: 10px\">${status}</td></tr>");
    }
  }
}

builder.append("</table>");

def htmlMessage = builder.toString();

LOG.fine("Sending test results table to Teams: ${htmlMessage}");
MICROSOFTTEAMS.sendTeamsMessage("TEAMS","FD Developers","Testing",htmlMessage,null);

LOG.setMessage("Successfully sent test results message to teams for ${EVENT.payload.project.projectName}");

def getProjectLink(String pProjectName, Long pProjectId)
{
  String link = String.format("%s/flexdeploy/faces/projects?objecttype=Project&projectid=%s&projectname=%s", FLEXDEPLOY.getFlexDeployBaseUrl(), pProjectId, pProjectName);
  return String.format("<a href=%s>%s</a>", link, pProjectName);
}

Tests Completed Filter

return EVENT.payload.workflow.workflowType == 'TEST';

Naturally you can edit the table/style in any way you wish. The below screen shot is a sample message from the listener:

Build Dependent FlexDeploy Project

This use case can be helpful when you have a FlexDeploy Project that is dependent on some other Project building first. Generally speaking you would try to handle this on the source control side of things but sometimes that just isn't possible. In the below example we are initiating a build on Project with Id 10241 only after a build has successfully completed for the Project with Id 10002.

Build Dependent Project Script

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "Build Dependent Project";
LOG.info("Running listener: ${listenerName}");

def streamId = FLEXDEPLOY.findStreamId(10241L,'master');
FLEXDEPLOY.buildProject(streamId,10241L);

LOG.setMessage("Successfully initiated a build for 10241");

Build Dependent Project Filter

//the project that should be built first
def initiator = 10002;

//only run when we have a successful build of project 10002
return EVENT.payload.executionStatus == "SUCCESS" && EVENT.payload.workflow.workflowType == "BUILD" && EVENT.payload.project.projectId == initiator;

Send email with logs on Workflow Failed

The example below makes use of the FLEXDEPLOY.getPluginLogInputStreams method to send workflow logs as attachments in an email. The message body simply consists of the json payload for the event.

This function is listening to the ‘Workflow Completed’ Event.

Email Failed Logs Script

import flexagon.ff.adfext.common.model.pojos.communication.EmailAttachment;
import groovy.json.JsonOutput;

//Carry out any custom action you wish for this event. Check out the documentation for reference or ideas.
//Optionally filter out events you dont want to execute by returning false on the filter script tab.
def listenerName = "Email Failed Logs";
LOG.info("Running listener: ${listenerName}");

//retrieve plugin log input stream map
def logs = FLEXDEPLOY.getPluginLogInputStreams(EVENT.payload.workflowExecutionId);
def attachments = [];

//for each entry create and add a new attachment
//prior to 5.4.0.1 logs would be a list instead of a map
logs.each { log -> 
  attachments.add(new EmailAttachment(log.value,"${log.key}.txt","text/plain"));
}

LOG.info("Sending email with ${attachments.size()} attachments.");

//send email
def subject = "${EVENT.payload.project.projectName} failed in ${EVENT.payload.environment.environmentName}";
def message = JsonOutput.prettyPrint(JsonOutput.toJson(EVENT.payload));
def recipients = ["my.user@domain.com"];

EMAIL.sendEmail(subject, message, recipients, attachments);

LOG.setMessage("Sent email message to ${recipients}");

Email Failed Logs Filter

return EVENT.payload.executionStatus == 'FAILURE';

Create Teams Approval Tasks

@Since 5.5.0.2

See the incoming samples also. They are needed to capture the button clicks that users perform on the Teams messages.

Function Script - Create Approvable Tasks in Teams Channels (Outgoing Webhook) - Available in 5.5.02
String message = MICROSOFTTEAMS.makeTaskCreatedMessageForWebhook(EVENT.payload,"https://<urlToYourFlexDeployServerOrExternalProxy>/flexdeploy/webhooks/v1/<uri setup in Incoming Webhook>");

String webhookUrlBI = "https://flexagon.webhook.office.com/webhookb2/cb7f2430-...9ee6-98a7eae43f9f";
String webhookUrlMule = "https://flexagon.webhook.office.com/webhookb2/cb7f2430-9...-98a7eae43f9f";
String webhookUrlSF = "https://flexagon.webhook.office.com/webhookb2/cb7f2430-96dc-4....-98a7eae43f9f";

if(condition for BI Approval){
MICROSOFTTEAMS.sendTeamsWebhookMessage(webhookUrlBI,message);
}else if(condition for BI Approval){
MICROSOFTTEAMS.sendTeamsWebhookMessage(webhookUrlMule,message);
}else if(condition for BI Approval){
MICROSOFTTEAMS.sendTeamsWebhookMessage(webhookUrlSF,message);
}