Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

This walkthrough will cover every step needed to get your docker image built and deployed through FlexDeploy. In this example we will be deploying the image to a Kubernetes Cluster on Oracle Cloud Infrastructure via Helm.

If you don’t have your own docker application you can follow along using the Natours repository used in this example.

Contents

Prerequisites

  • Docker CLI - An available docker cli for building the image

  • Kubernetes Cluster - For deployment

    • This guide will be using OKE, but any cluster will suffice.

  • Kubectl - Install it on the FlexDeploy server and pointing to the K8s cluster.

  • FlexDeploy Knowledge

    • We won’t be covering some of the more basic steps like creating SCM Instances and other Topology configuration.

Building and Pushing the Image

The first goal is to build our image. In the case of the Natours repository, we don’t need any additional compile steps. All we need to do is run docker build with the appropriate commands

Creating a Registry Account

The first thing we need to do is create a Registry Account in FlexDeploy. This account contains the necessary information for pushing our image. Navigate to Topology->Integrations->Containers and click the Plus button.

Be sure to select the Provider as DockerRegistry and populate the information as necessary. In the above account it is configured to push to the joelwenzel account on dockerhub.com

Setting up the Project

Next, create a new Project in FlexDeploy. Give it a name that closely resembles your Git repository name and select Container as the Classification.

Done Offscreen

  • Create your SCM Instance and configure your Project to use it

After creating the Project, click on the Container Configuration tab. It is here where we specify the image tag information and build behavior.

Add the following configuration:

Naturally your image name and account could be different compared to what’s shown above. With this configuration, FlexDeploy will build an image with an incrementing Project Version every time we run a build. In addition to tagging the image with the ProjectVersion it will tag with latest and push the image to the Docker Hub registry that was set up earlier.

We will come back to image scanning, but for now lets continue on.

Creating the Build Workflow

Now that the Project is setup to handle the building and pushing of the image, all we need our workflow to do is clone the source code and build the image. The default configuration is is fine for both steps, simply drag and drop.

 Workflow Source
<?xml version="1.0" encoding="UTF-8"?>
<ns0:WorkFlow xmlns:ns1="http://flexagon.com/flexdeploy/workflow/common" xmlns:ns0="http://flexagon.com/flexdeploy/workflow">
   <ns1:Name>BuildProjectImage</ns1:Name>
   <ns1:Description></ns1:Description>
   <ns0:Steps>
      <ns0:Step>
         <ns1:Name>cloneProjectSources</ns1:Name>
         <ns1:StepId>1</ns1:StepId>
         <ns0:InvokePlugin>
            <ns0:PluginName>FlexagonGITPlugin</ns0:PluginName>
            <ns0:PluginOperation>cloneProjectSources</ns0:PluginOperation>
            <ns0:consumesArtifacts>false</ns0:consumesArtifacts>
            <ns0:producesArtifacts>false</ns0:producesArtifacts>
            <ns0:EndpointSelection>
               <ns0:EndpointSelectionChoice>All</ns0:EndpointSelectionChoice>
            </ns0:EndpointSelection>
            <ns0:PluginInputs/>
            <ns0:UserInputs/>
            <ns0:PluginOutputs/>
            <ns0:UserOutputs/>
         </ns0:InvokePlugin>
      </ns0:Step>
      <ns0:Step>
         <ns1:Name>buildProjectImage</ns1:Name>
         <ns1:StepId>2</ns1:StepId>
         <ns0:InvokePlugin>
            <ns0:PluginName>FlexagonDockerPlugin</ns0:PluginName>
            <ns0:PluginOperation>buildProjectImage</ns0:PluginOperation>
            <ns0:consumesArtifacts>false</ns0:consumesArtifacts>
            <ns0:producesArtifacts>false</ns0:producesArtifacts>
            <ns0:EndpointSelection>
               <ns0:EndpointSelectionChoice>All</ns0:EndpointSelectionChoice>
            </ns0:EndpointSelection>
            <ns0:EndpointExecutionChoice>Any</ns0:EndpointExecutionChoice>
            <ns0:PluginInputs>
               <ns0:PluginInput>
                  <ns0:Name>FDDKR_INP_DOCKER_FILE</ns0:Name>
                  <ns0:ValueType>Text</ns0:ValueType>
                  <ns0:Encrypted>false</ns0:Encrypted>
                  <ns1:Type>String</ns1:Type>
               </ns0:PluginInput>
               <ns0:PluginInput>
                  <ns0:Name>FDDKR_INP_IMAGE_NAME</ns0:Name>
                  <ns0:ValueType>Text</ns0:ValueType>
                  <ns0:Encrypted>false</ns0:Encrypted>
                  <ns1:Type>String</ns1:Type>
               </ns0:PluginInput>
               <ns0:PluginInput>
                  <ns0:Name>FDDKR_INP_PUSH_IMAGE</ns0:Name>
                  <ns0:ValueType>Text</ns0:ValueType>
                  <ns0:Encrypted>false</ns0:Encrypted>
                  <ns1:Type>Boolean</ns1:Type>
                  <ns0:Text>false</ns0:Text>
               </ns0:PluginInput>
            </ns0:PluginInputs>
            <ns0:UserInputs/>
            <ns0:PluginOutputs>
               <ns0:OutputValue>
                  <ns0:NameInCallee>FDDKR_OUT_IMAGE_ID</ns0:NameInCallee>
               </ns0:OutputValue>
            </ns0:PluginOutputs>
            <ns0:UserOutputs/>
         </ns0:InvokePlugin>
      </ns0:Step>
   </ns0:Steps>
</ns0:WorkFlow>

Creating the Build Topology

Lastly, we need to create the topology for the build process.

Done Offscreen

  • Create an endpoint where Docker is installed

    • If docker is installed on the FlexDeploy server, the localhost endpoint can be used.

  • Create a Docker instance

    • Add the Build Environment to the Instance

Ensure that the Docker Instance has the workflow created above added. This is how FlexDeploy knows what properties to show on certain screens.

Docker on Windows or Docker-Desktop

If you are using docker on windows, you will need to perform these additional steps.

Done Offscreen

  • Add the Docker Endpoint to your Docker-Build EnvInst in Topology Overview

  • Update the Build Workflow and Build Instance on the Project Configuration tab of the Project.

Deploying via Helm

First, create an OKE cluster in Oracle Cloud Infrastructure. For the most part you can accept the default configuration for the cluster. If you already have a cluster you can safely skip this step.

  • No labels