Endpoints can be accessed and modified through this API using four services: GET, POST, PUT, and PATCH. These four services allow for the retrieval, creation, complete update, and partial update of endpoints.

Authentication - Use Basic Authentication for this API.

GET

There are three implementations of GET. One will find an Endpoint with the given Id and return the JSON representation of the Endpoint. The next one will find a list of Endpoints matching the parameters supplied to it. The last one will test the connection to an endpoint.

GET by ID

This GET service will find an Endpoint with the given Id and return the JSON representation of the object.

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint

Request

Parameter	Required	Type	Description
Id	Yes	URL	This is a URL parameter for the Id which is used to find and return an Endpoint

Response

Attributes	Type	Description
endpointId	Long	This is an identification number of an existing Endpoint.
endpointName	String	This is the unique name of the corresponding Endpoint.
description	String	This is a description of the Endpoint.
isActive	Boolean	This is a Boolean that tracks whether or not the Endpoint is active.
connectionType	String	This specifies the connection Type.
osType	String	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection.
endpointAddress	String	This is a String associated with the address of the endpoint.
endpointPort	String	This is a port associated with an SSH connection.
baseDirectory	String	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
isBaseDirectoryExpression	String	"Y" if the base directory is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
javaPath	String	This is a character sequence that specifies the java path of the corresponding Endpoint.
isJavaPathExpression	String	"Y" if the Java path is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
password	String	Kept for backward compatibility. It will be either ***** or null depending on whether passwordCredentialId is set or not.
passwordCredentialId	Long	This is the credential id associated with the endpoint password.
privateKey	String	Fully-qualified path of the SSH private key file.
passphrase	String	Kept for backward compatibility. It will be either ***** or null depending on whether passphraseCredentialId is set or not.
passphraseCredentialId	Long	This is the credential id associated with the endpoint passphrase.
runAsUserName	String	An optional user to run as (using sudo) after establishing connection to the endpoint.
dockerHost	Boolean	This indicates if endpoint is docker engine.
k8sCluster	Boolean	This indicates if endpoint is kubernetes engine.
k8sContext	String	Name of the configured K8s context.
endpointGroup	String	This is a character sequence associated with this Endpoint's corresponding group.
endpointSubgroup	String	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response Codes

HTTP Code	Description
200	Endpoint was found and returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found
500	Unexpected internal server error

Example

If we had an endpoint in our database with an Id of 13901 and had the following attributes

Endpoint 13910

{
    "endpointId": 13910,
    "endpointName": "GOODPOST1",
    "description": "description",
    "isActive": true,
    "connectionType": "SSH",
    "osType": "UNIX",
    "endpointAddress": "NotNeeded00",
    "endpointPort": "1",
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": "userName",
    "passwordCredentialId": 12345,
    "privateKey": "privateKey",
    "runAsUserName": "TestInput",
    "endpointGroup": "endpointGroup",
    "endpointSubgroup": "subGroupTester"

}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/13901

The GET request would return the following JSON endpoint object

Endpoint GET Return JSON

{
    "endpointId": 13910,
    "endpointName": "GOODPOST1",
    "description": "description",
    "isActive": true,
    "connectionType": "SSH",
    "osType": "UNIX",
    "endpointAddress": "NotNeeded00",
    "endpointPort": "1",
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": "userName",
    "password": "*****",
    "passwordCredentialId": 12345,
    "privateKey": "privateKey",
    "passphrase": "*****",
    "passphraseCredentialId": 54321,
    "runAsUserName": "TestInput",
    "endpointGroup": "endpointGroup",
    "endpointSubgroup": "subGroupTester"
}

GET (Using Query Parameters)

This GET service will return a list of Endpoints in the form of JSON objects based on the query parameters name, address, group and subgroup. Endpoints are only returned if they match ALL of the specified query parameters. If no query parameters are given this request will return the entire list of Endpoints.

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint?

Append the following character sequences to the above URL to specify Query parameters.

Use '&' between successive query parameters:

endpointName={name}

endpointAddress={address}

endpointGroup={group}

endpointSubgroup={subgroup}

isActive={boolean}

Examples:

To Specify the name parameter only:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}

To Specify isActive parameter Only:

http://host:port/flexdeploy/rest/v1/topology/endpoint?isActive=true

To Specify the name and group parameters:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}&endpointGroup={group}

To Specify the name, address and group parameters:

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointName={name}&endpointAddress={address}&endpointGroup={group}

The query parameters are not case sensitive. Searching by name=NAME is the same as searching by name=name.

Request

Parameter	Required	Type	Description
endpointName	No	Query - String	Contains ignore case search
endpointAddress	No	Query - String	Equals ignore case search
endpointGroup	No	Query - String	Equals ignore case search
endpointSubgroup	No	Query - String	Equals ignore case search
isActive	No	Query - Boolean	Returns endpoints where isActive field matches parameter.

Response

Attributes	Type	Description
endpointId	Long	This is an identification number of an existing Endpoint.
endpointName	String	This is the unique name of the corresponding Endpoint.
description	String	This is a description of the Endpoint.
isActive	Boolean	This is a Boolean that tracks whether or not the Endpoint is active.
connectionType	String	This specifies the connection Type.
osType	String	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection.
endpointAddress	String	This is a String associated with the address of the endpoint.
endpointPort	String	This is a port associated with an SSH connection.
baseDirectory	String	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
isBaseDirectoryExpression	String	"Y" if the base directory is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
javaPath	String	This is a character sequence that specifies the java path of the corresponding Endpoint.
isJavaPathExpression	String	"Y" if the Java path is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
password	String	Kept for backward compatibility. It will be either ***** or null depending on whether passwordCredentialId is set or not.
passwordCredentialId	Long	This is the credential id associated with the endpoint password.
privateKey	String	Fully-qualified path of the SSH private key file.
passphrase	String	Kept for backward compatibility. It will be either ***** or null depending on whether passphraseCredentialId is set or not.
passphraseCredentialId	Long	This is the credential id associated with the endpoint passphrase.
runAsUserName	String	An optional user to run as (using sudo) after establishing connection to the endpoint.
dockerHost	Boolean	This indicates if endpoint is docker engine.
k8sCluster	Boolean	This indicates if endpoint is kubernetes engine.
k8sContext	String	Name of the configured K8s context.
endpointGroup	String	This is a character sequence associated with this Endpoint's corresponding group.
endpointSubgroup	String	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response Codes

HTTP Code	Description
200	Search successful and results returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
500	Unexpected internal server error

Example

If we had an endpoints in our database with a Ids of 14517, and 14518 and the following attributes

Endpoint - 14517

{
    "endpointId": 14517,
    "endpointName": "Motel6",
    "description": null,
    "isActive": true,
    "connectionType": "LOCALHOST",
    "osType": null,
    "endpointAddress": "localhost",
    "endpointPort": null,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": null,
    "passwordCredentialId": null,
    "privateKey": null,
    "passphrase": null,
    "passphraseCredentialId": null,
    "runAsUserName": null,
    "endpointGroup": "Germany",
    "endpointSubgroup": "Munich"
}

Endpoint 14518

{
    "endpointId": 14518,
    "endpointName": "Raddison Hotel",
    "description": null,
    "isActive": true,
    "connectionType": "LOCALHOST",
    "osType": null,
    "endpointAddress": "localhost",
    "endpointPort": null,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": null,
    "passphraseCredentialId": null,
    "passwordCredentialId": null,
    "privateKey": null,
    "password": null,
    "passphrase": null,
    "runAsUserName": null,
    "endpointGroup": "Germany",
    "endpointSubgroup": "Berlin"
}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint?endpointGroup=Germany

The GET request would return the following JSON endpoint object

Endpoint GET Return JSON

[
    {
        "description": null,
        "password": null,
        "passwordCredentialId": null,
        "userName": null,
        "isActive": true,
        "privateKey": null,
        "baseDirectory": "ServerInstallRoot + '/localhost'",
        "osType": null,
        "javaPath": "ServerJavaHome",
        "endpointName": "Motel6",
		"isBaseDirectoryExpression": "N",
        "endpointAddress": "localhost",
        "endpointId": 14517,
        "passphrase": null,
        "passphraseCredentialId": null,
        "connectionType": "LOCALHOST",
		"isJavaPathExpression": "N",
        "endpointPort": null,
        "endpointGroup": "Germany",
        "endpointSubgroup": "Munich",
        "runAsUserName": null
    },
    {
        "description": null,
        "password": null,
        "passwordCredentialId": null,
        "userName": null,
        "isActive": true,
        "privateKey": null,
        "baseDirectory": "ServerInstallRoot + '/localhost'",
        "osType": null,
        "javaPath": "ServerJavaHome",
        "endpointName": "Raddison Hotel",
		"isBaseDirectoryExpression": "N",
        "endpointAddress": "localhost",
        "endpointId": 14518,
        "passphrase": null,
        "passphraseCredentialId": null,
        "connectionType": "LOCALHOST",
		"isJavaPathExpression": "N",
        "endpointPort": null,
        "endpointGroup": "Germany",
        "endpointSubgroup": "Berlin",
        "runAsUserName": null
    }
]

Test Connection (using GET)

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/{Id}/test

This GET service will test the connection to an Endpoint with the given Id and return the JSON representation of a test result.

Request

Parameter	Required	Type	Description
Id	Yes	URL	This is a URL parameter for the Id which is used to find and return an Endpoint

Response

Attributes	Type	Description
message	String	If the test failed, the message will provide more information on why it failed. Otherwise, the message will be ‘Connection to Endpoint [name] was successful'
successful	Boolean	Whether or not the test was successful

Response Codes

HTTP Code	Description
200	Endpoint was found, tested and results returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found.
500	Unexpected internal server error

Example

Assuming we have an endpoint setup like the following, and it is a valid endpoint

Endpoint 13910

{
    "endpointId": 13910,
    "endpointName": "TEST1",
    "description": "description",
    "isActive": true,
    "connectionType": "SSH",
    "osType": "UNIX",
    "endpointAddress": "hostname:port",
    "endpointPort": "1",
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": "userName",
    "passphraseCredentialId": 54321,
    "passphrase": "Passphrase",
    "passwordCredentialId": 12345,
    "privateKey": "privateKey",
    "runAsUserName": "TestInput",
    "endpointGroup": "endpointGroup",
    "endpointSubgroup": "subGroupTester"
}

When we run a GET request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/13910/test

The GET request would return the following JSON testresult object:

Testresult

{
    "message": "Connection to Endpoint [TEST1] was successful.",
    "successful": true
}

POST

This POST service will create a new Endpoint with the same attributes as the given JSON object.

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint

Request

Attributes	Type	Required	Description
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
description	String	No	A description of the Endpoint.
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
connectiontype	String	Yes	This specifies the connection Type. "SSH" or "LOCALHOST"
osType	String	Dependent	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Dependency: Mandatory when connectionType is "SSH" otherwise not used.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	Dependent	This is a port associated with an SSH connection. Dependency: Mandatory when connectionType is "SSH", otherwise not used.
baseDirectory	String	Yes	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
javaPath	String	Yes	This is a character sequence that specifies the java path of the corresponding Endpoint. Not required if the Endpoint is a Docker Host.
password	String	Dependent	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	Dependent	This is the id of the credential associated with the endpoint password. Dependency: Either passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
privateKey	String	Dependent	Fully-qualified path of the SSH private key file. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response

Attributes	Type	Description
endpointId	Long	This is an identification number of an existing Endpoint.
endpointName	String	This is the unique name of the corresponding Endpoint.
description	String	This is a description of the Endpoint.
isActive	Boolean	This is a Boolean that tracks whether or not the Endpoint is active.
connectionType	String	This specifies the connection Type.
osType	String	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection.
endpointAddress	String	This is a String associated with the address of the endpoint.
endpointPort	String	This is a port associated with an SSH connection.
baseDirectory	String	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
isBaseDirectoryExpression	String	"Y" if the base directory is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
javaPath	String	This is a character sequence that specifies the java path of the corresponding Endpoint.
isJavaPathExpression	String	"Y" if the Java path is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
password	String	Kept for backward compatibility. It will be either ***** or null depending on whether passwordCredentialId is set or not.
passwordCredentialId	Long	This is the credential id associated with the endpoint password.
privateKey	String	Fully-qualified path of the SSH private key file.
passphrase	String	Kept for backward compatibility. It will be either ***** or null depending on whether passphraseCredentialId is set or not.
passphraseCredentialId	Long	This is the credential id associated with the endpoint passphrase.
runAsUserName	String	An optional user to run as (using sudo) after establishing connection to the endpoint.
dockerHost	Boolean	This indicates if endpoint is docker engine.
k8sCluster	Boolean	This indicates if endpoint is kubernetes engine.
k8sContext	String	Name of the configured K8s context.
endpointGroup	String	This is a character sequence associated with this Endpoint's corresponding group.
endpointSubgroup	String	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response Codes

HTTP Code	Description
200	Endpoint was found and returned
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
500	Unexpected internal server error

Example

If the POST request receives the following JSON endpoint object,

POST JSON

{
    "password": "myPassword",
    "passwordCredentialId": null,
    "description": "description",
    "userName": "userName",
    "privateKey": "privateKey",
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "GoodPost",
    "connectionType": "SSH",
    "endpointAddress": "NotNeeded00",
    "endpointId": null,
    "endpointSubgroup": "subGroupTester",
    "endpointPort": "1",
    "endpointGroup": "endpointGroup",
    "runAsUserName": "TestInput",
    "osType": "UNIX",
    "javaPath": "ServerJavaHome",
    "passphrase": "myPassphrase",
    "passphraseCredentialId": null
}

The following endpoint object would then be created as a new row in the database

Endpoint POST Return JSON

{
    "endpointId": 13922,
    "endpointName": "GoodPost",
    "description": "description",
    "isActive": true,
    "connectionType": "SSH",
    "osType": "UNIX",
    "endpointAddress": "NotNeeded00",
    "endpointPort": "1",
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "isBaseDirectoryExpression": "N",
    "javaPath": "ServerJavaHome",
    "isJavaPathExpression": "N",
    "userName": "userName",
    "passphraseCredentialId": 29084,
    "password": "*****",
    "passwordCredentialId": 74839,
    "privateKey": "privateKey",
    "passphrase": "*****",
    "runAsUserName": "TestInput",
    "endpointGroup": "endpointGroup",
    "endpointSubgroup": "subGroupTester",
}

PUT

This PUT service will update all attributes of an Endpoint with the given Id based on the attributes of a JSON objects parameter values.

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/{Id}

Request

Attributes	Type	Required	Description
Id	URL	Yes	URL parameter to specify which endpoint to replace
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
description	String	No	A description of the Endpoint.
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
connectiontype	String	Yes	This specifies the connection Type. "SSH" or "LOCALHOST"
osType	String	Dependent	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Dependency: Mandatory when connectionType is "SSH" otherwise not used.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	Dependent	This is a port associated with an SSH connection. Dependency: Mandatory when connectionType is "SSH", otherwise not used.
baseDirectory	String	Yes	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
javaPath	String	Yes	This is a character sequence that specifies the java path of the corresponding Endpoint. Not required if the Endpoint is a Docker Host.
password	String	Dependent	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	Dependent	This is the id of the credential associated with the endpoint password. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
privateKey	String	Dependent	Fully-qualified path of the SSH private key file. Dependency: Either password, passwordCredentialId, or privateKey is required when connectionType is "SSH" otherwise not used.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response

Attributes	Type	Description
endpointId	Long	This is an identification number of an existing Endpoint.
endpointName	String	This is the unique name of the corresponding Endpoint.
description	String	This is a description of the Endpoint.
isActive	Boolean	This is a Boolean that tracks whether or not the Endpoint is active.
connectionType	String	This specifies the connection Type.
osType	String	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection.
endpointAddress	String	This is a String associated with the address of the endpoint.
endpointPort	String	This is a port associated with an SSH connection.
baseDirectory	String	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
isBaseDirectoryExpression	String	"Y" if the base directory is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
javaPath	String	This is a character sequence that specifies the java path of the corresponding Endpoint.
isJavaPathExpression	String	"Y" if the Java path is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
password	String	Kept for backward compatibility. It will be either ***** or null depending on whether passwordCredentialId is set or not.
passwordCredentialId	Long	This is the credential id associated with the endpoint password.
privateKey	String	Fully-qualified path of the SSH private key file.
passphrase	String	Kept for backward compatibility. It will be either ***** or null depending on whether passphraseCredentialId is set or not.
passphraseCredentialId	Long	This is the credential id associated with the endpoint passphrase.
runAsUserName	String	An optional user to run as (using sudo) after establishing connection to the endpoint.
dockerHost	Boolean	This indicates if endpoint is docker engine.
k8sCluster	Boolean	This indicates if endpoint is kubernetes engine.
k8sContext	String	Name of the configured K8s context.
endpointGroup	String	This is a character sequence associated with this Endpoint's corresponding group.
endpointSubgroup	String	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response Codes

HTTP Code	Description
201	Endpoint was created successfully
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found
500	Unexpected internal server error

Example

If we had an endpoint in our database with an Id of 11101 and had the following attributes

EndPoint Attributes as JSON

{
   "description": "description",
   "userName": "userName",
   "passwordCredentialId": 74839,
   "isActive": true,
   "privateKey": "privateKey",
   "endpointName": "GoodPost3",
   "osType": null,
   "connectionType": "SSH",
   "javaPath": "ServerJavaHome",
   "endpointAddress": "endpointAddress",
   "baseDirectory": "ServerInstallRoot + '/localhost'",
   "passphrase": "passphrase",
   "passphraseCredentialId": 29084,
   "endpointId": 11101,
   "endpointGroup": "endpointGroup",
   "endpointPort": null,
   "runAsUserName": "runAsUserName",
   "endpointSubgroup": "endpointSubgroup"
}

When we run a PUT request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/11101

And the PUT request receives the following JSON endpoint object,

Endpoint PUT Receive JSON

{
   "description": "newDescription",
   "userName": "newUserName",
   "password": "newPassword",
   "passwordCredentialId": null,
   "isActive": true,
   "privateKey": "newPrivateKey",
   "endpointName": "GoodPost3",
   "osType": "UNIX",
   "connectionType": "SSH",
   "javaPath": "ServerJavaHome",
   "endpointAddress": "endpointAddress",
   "baseDirectory": "ServerInstallRoot + '/localhost'",
   "passphrase": "passphrase",
   "passphraseCredentialId": null,
   "endpointId": null,
   "endpointGroup": "endpointGroup",
   "endpointPort": null,
   "runAsUserName": "runAsUserName",
   "endpointSubgroup": "endpointSubgroup"
}

The PUT request would then update the endpoint with Id 11101 and return the following JSON endpoint object.

Endpoint PUT Return JSON

{
   "description": "newDescription",
   "userName": "newUserName",
   "password": "newPassword",
   "passwordCredentialId": 74839,
   "isActive": true,
   "privateKey": "newPrivateKey",
   "endpointName": "GoodPost3",
   "osType": "UNIX",
   "connectionType": "SSH",
   "isJavaPathExpression": "N",
   "javaPath": "ServerJavaHome",
   "endpointAddress": "endpointAddress",
   "baseDirectory": "ServerInstallRoot + '/localhost'",
   "passphrase": "passphrase",
   "passphraseCredentialId": 29084,
   "endpointId": null,
   "endpointGroup": "endpointGroup",
   "endpointPort": null,
   "runAsUserName": "runAsUserName",
   "isBaseDirectoryExpression": "N",
   "endpointSubgroup": "endpointSubgroup"
}

PATCH

This PATCH service will update an existing endpoint with the information passed through a JSON object. If an attribute is not provided, it will not be updated in the Endpoint.

API URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/{Id}

Request

Attributes	Type	Required	Description
Id	URL	Yes	URL parameter to specify which endpoint to patch
endpointName	String	Yes	This is the unique name of the corresponding Endpoint.
description	String	No	A description of the Endpoint.
isActive	Boolean	No	This is a Boolean that tracks whether or not the Endpoint is active. Default is true.
connectiontype	String	No	This specifies the connection Type. "SSH" or "LOCALHOST"
osType	String	No	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection. Note: Only applicable when connectionType is "SSH" otherwise not used.
endpointAddress	String	No	This is a String associated with the address of the endpoint.
endpointPort	String	No	This is a port associated with an SSH connection. Note: Only applicable when connectionType is "SSH", otherwise not used.
baseDirectory	String	No	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
javaPath	String	No	This is a character sequence that specifies the java path of the corresponding Endpoint.
password	String	No	Allowed for backward compatibility, as this is replaced by passwordCredentialId. Only password or passwordCredentialId can be provided. If password is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
passwordCredentialId	Long	No	This is the id of the credential associated with the endpoint password. Note: Only applicable when connectionType is "SSH" otherwise not used.
privateKey	String	No	Fully-qualified path of the SSH private key file. Note: Only applicable when connectionType is "SSH" otherwise not used.
passphraseCredentialId	Long	No	This is the id of the credential associated with the endpoint passphrase. Note: Only valid if a privateKey is specified, or already configured for endpoint.
passphrase	String	No	Allowed for backward compatibility, as this is replaced by passphraseCredentialId. Only passphrase or passphraseCredentialId can be provided. If passphrase is provided, it will be updated on corresponding credential only if credential is stored in Local credential store.
runAsUserName	String	No	An optional user to run as (using sudo) after establishing connection to the endpoint. Note: Only applicable when connection Type is "SSH" otherwise not used.
dockerHost	Boolean	No	This indicates if endpoint is docker engine. Defaults to false.
k8sCluster	Boolean	No	This indicates if endpoint is kubernetes engine. Defaults to false.
k8sContext	String	No	Name of the configured K8s context.
endpointSubgroup	String	No	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response

Attributes	Type	Description
endpointId	Long	This is an identification number of an existing Endpoint.
endpointName	String	This is the unique name of the corresponding Endpoint.
description	String	This is a description of the Endpoint.
isActive	Boolean	This is a Boolean that tracks whether or not the Endpoint is active.
connectionType	String	This specifies the connection Type.
osType	String	This is a character sequence which corresponds to the operating system type used in the corresponding remote connection.
endpointAddress	String	This is a String associated with the address of the endpoint.
endpointPort	String	This is a port associated with an SSH connection.
baseDirectory	String	This is a character sequence which corresponds to the base directory of the corresponding Endpoint.
isBaseDirectoryExpression	String	"Y" if the base directory is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
javaPath	String	This is a character sequence that specifies the java path of the corresponding Endpoint.
isJavaPathExpression	String	"Y" if the Java path is a Groovy Expression "N" if it isn't. This cannot be set manually through the API, it will automatically be set to "N".
password	String	Kept for backward compatibility. It will be either ***** or null depending on whether passwordCredentialId is set or not.
passwordCredentialId	Long	This is the credential id associated with the endpoint password.
privateKey	String	Fully-qualified path of the SSH private key file.
passphrase	String	Kept for backward compatibility. It will be either ***** or null depending on whether passphraseCredentialId is set or not.
passphraseCredentialId	Long	This is the credential id associated with the endpoint passphrase.
runAsUserName	String	An optional user to run as (using sudo) after establishing connection to the endpoint.
dockerHost	Boolean	This indicates if endpoint is docker engine.
k8sCluster	Boolean	This indicates if endpoint is kubernetes engine.
k8sContext	String	Name of the configured K8s context.
endpointGroup	String	This is a character sequence associated with this Endpoint's corresponding group.
endpointSubgroup	String	This is a character sequence associated with this Endpoint's corresponding sub-group.

Response Codes

HTTP Code	Description
200	Endpoint was found and updated
400	Bad request
401	Authentication failure
403	Authorization failure (no access to resource)
404	Endpoint not found
500	Unexpected internal server error

Example

If we had an endpoint in our database with an Id of 13909 and had the following attributes

Endpoint PATCH JSON

{
    "passwordCredentialId": null,
    "description": null,
    "userName": null,
    "privateKey": null,
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "NotPatchedYet",
    "connectionType": "LOCALHOST",
    "endpointAddress": "localhost",
    "endpointId": 13909,
    "endpointSubgroup": null,
    "endpointPort": null,
    "endpointGroup": "TheGroup",
    "runAsUserName": null,
    "osType": null,
    "javaPath": "ServerJavaHome",
    "passphrase": null,
    "passphraseCredentialId": null
}

When we run a PATCH request at the following URL

http://host:port/flexdeploy/rest/v1/topology/endpoint/13909

And the PATCH request receives the following JSON endpoint object,

Endpoint PATCH input JSON

{
    "endpointName": "PatchedEndpoint",
    "endpointGroup": null
}

The PATCH request would then update the endpoint with Id 13909 and return the following JSON endpoint object

Endpoint PATCH Return JSON

{
    "password": null,
    "passwordCredentialId": null,
    "description": null,
    "userName": null,
    "privateKey": null,
    "isActive": true,
    "baseDirectory": "ServerInstallRoot + '/localhost'",
    "endpointName": "PatchedEndpoint",
    "isBaseDirectoryExpression": "N",
    "connectionType": "LOCALHOST",
	"isJavaPathExpression": "N",
    "endpointAddress": "localhost",
    "endpointId": 13909,
    "endpointSubgroup": null,
    "endpointPort": null,
    "endpointGroup": "TheGroup",
    "runAsUserName": null,
    "osType": null,
    "javaPath": "ServerJavaHome",
    "passphrase": null,
    "passphraseCredentialId": null
}

EndPoint API

GET

GET by ID

Request

Response

Response Codes

Example

GET (Using Query Parameters)

Append the following character sequences to the above URL to specify Query parameters.

Use '&' between successive query parameters:

Examples:

To Specify the name parameter only:

To Specify isActive parameter Only:

To Specify the name and group parameters:

To Specify the name, address and group parameters:

Request

Response

Response Codes

Example

Test Connection (using GET)

Request

Response

Response Codes

Example

POST

Request

Response

Response Codes

Example

PUT

Request

Response

Response Codes

Example

PATCH

Request

Response

Response Codes

Example