Many project configuration options are available to the templates screen. This page seeks to list all of the available methods and enough information to use them in your templates.

Script Variables

Variable Name	Description
Project	Project being created. This corresponds to one row in input CSV file and will eventually create one single Project.
<Custom Inputs>	Inputs defined on Template.

General Project Methods

Method	Required	Description
Project.setProjectPath(String pProjectPath)	Yes	Set Project path. For example. FlexDeploy/SOA/HR. In this example, SOA folder will be created if it does not exist and HR application will be created if it does not exist. You must make sure that you are defining last element in Project Path consistently as Application. For example, along with above example FlexDeploy/SOA/HR, if you used path as FlexDeploy/SOA/HR/Application, you will have issues.
Project.setProjectName(String pProjectName)	Yes	Set Project Name.
Project.setDeployPriority(Integer pDeployPriority)	Yes	Set Project Priority. If not supplied 1 is used.
Project.setDeployPriorityScope(String pDeployPriorityScope)	Yes	Defaults to Application. Possible values are Application,Folder,Global.
Project.setDescription(String pDescription)	Yes
Project.addProperty(String pPropertyName, Object pPropertyValue)	No	This depends on type of Project being created. For example, // using hard coded partition name as default. Project.addProperty("FDSOA_PARTITION", "default"); // Using Input PartitionName. Each project can specify different partition Project.addProperty("FDSOA_PARTITION", PartitionName); Project.addProperty("FDSOA_OVERWRITE_REVISION", false); Project.addProperty("FDSOA_MAKE_DEFAULT_REVISION", true);
Project.addProperty(String pPropertyName, Object pPropertyValue, boolean pExpression)	No	Same as above method, except you can specify whether Property Value is expression or not by using boolean parameter.
Project.setActive(boolean pActive)	No	Default would be true.
Change default stream name.	No	This must be done prior to adding any Stream. `Project.getStreams().get(0).setStreamName("master");`

Workflow Methods

Method	Required	Description
Project.setBuildWorkflowName(String pBuildWorkflowName)	Yes	Set Build Workflow name to be used by Project.
Project.setDeployWorkflowName(String pDeployWorkflowName)	Yes	Set Deploy Workflow name to be used by Project.

Instance Methods

All these methods take instance Codes, not Names as the methods suggest.

Method

Required

Description

Project.setBuildInstanceName(String pBuildInstanceName)

Yes

Set Build Instance Code to be used for Project.

Project.addDeployInstances(String pDeployInstances)

Yes

Set one or more Deploy Instance Code to be used for Project. Use comma (,) as separator for passing more than one Instance code. You can also call this method more than once with individual value of Instance code.

For example,

Project.addDeployInstances("SOA1,SOA2");

OR

Project.addDeployInstances("SOA1");

Project.addDeployInstances("SOA2");

Source Control Configuration Methods

SCM Type

Use one of the two options shown below.

Method	Required	Description
Project.setSCMType(pSCMType)	No	Set SCM Type or use Project Defaults. Possible values are SVN, GIT, TFVC, CVS, PERF, CCUCM, PVCS.

Method	Required	Description
Project.setSVNForSCM()	No	Call to use Subversion for Project.
Project.setGITForSCM()	No	Call to use Git for Project.
Project.setTFVCForSCM()	No	Call to use Microsoft TFVC for Project.
Project.setCVSForSCM()	No	Call to use CVS for Project.
Project.setPERFForSCM()	No	Call to use Perforce for Project.
Project.setCCUCMForSCM()	No	Call to use ClearCase UCM for Project.
Project.setPVCSForSCM()	No	Call to use PVCS for Project.
Project.setFILEForSCM()	No	Call to use File System SCM type for project.

Stream Settings

Add additional project streams if necessary. These streams are what the int pSequenceNumber in the SCM details section below refer to.

Project.createStreamFromMainStream(String pStreamName)

Project.createStream(String pStreamName, String pVersionSyntaxScript)
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription)
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3)

Method	Required	Description
Project.createStreamFromMainStream(String pStreamName)	No	Create a copy of the main stream with a new name. The main stream is generated from default configurations. For example, Project.createStreamFromMainStream("branch1")
Project.createStream(String pStreamName, String pVersionSyntaxScript)	No	Create an additional stream based on the inputs. Description, Attribute1, Attribute2 and Attribute3 will be defaulted to blank entries. For example, Project.createStream("branch1", "\"1.0")
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription)	No	Create an additional stream based on the inputs. Attribute1, Attribute2 and Attribute3 will be default to blank entries. For example, Project.createStream("branch1", "\"1.0", "March release")
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3)	No	Create an additional stream based on the inputs. The attribute values can be further utilized in different path scripts during SCM configurations below. For example, Project.createStream("branch1", "\"1.0", "March release","attr1","", "")

SCM Details

Next, configure the SCM details for your selected SCM Type. Choose one of the methods that contains the options that you need to configure for your projects from the list.

If SCM Defaults are setup under Administration → Defaults, these may be unnecessary.

SCM Type	Supported Methods
SVN	Project.addSVNConfig(int pSequenceNumber, String pInstanceName) Project.addSVNConfig(int pSequenceNumber, String pInstanceName, String pTrunkPathScript, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory) Project.addSVNConfig(int pSequenceNumber, String pInstanceName) Project.addSVNConfig(1,"SVNPROD") Project.addSVNConfig(1,"SVNPROD","\"/trunk/\" + ProjectName","\"/branches/\" + StreamName + \"/\" + ProjectName","","") Create a SVN configuration for the project based on a pre-configured SCM instance code for SVN. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Trunk Path Script, Branch Path Script, Tag Path Script and Checkout Directory will be populated from the Project SVN Setup Defaults. For example, Project.addSVNConfig(int pSequenceNumber, String pInstanceName, String pTrunkPathScript, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory) Create a SVN configuration for the project based on a pre-configured SCM instance code for SVN. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Trunk Path Script, Branch Path Script, Tag Path Script and Checkout Directory provided on the method will overwrite the values from the Project SVN Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example,
GIT	Project.addGITConfig(int pSequenceNumber, String pInstanceName) Project.addGITConfig(int pSequenceNumber, String pInstanceName, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory, String pSparseCheckoutFoldersScript) Project.addGITConfig(int pSequenceNumber, String pInstanceName) Create a GIT configuration for the project based on a pre-configured SCM instance code for GIT. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Branch Path Script, Tag Path Script, Checkout Directory and Sparse Checkout Folders Script will be populated from the Project GIT Setup Defaults. For example, Project.addGITConfig(1,"GITPROD") Project.addGITConfig(int pSequenceNumber, String pInstanceName, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory, String pSparseCheckoutFoldersScript) Create a GIT configuration for the project based on a pre-configured SCM instance code for GIT. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Branch Path Script, Tag Path Script, Checkout Directory and Sparse Checkout Folders Script provided on the method will overwrite the values from the Project GIT Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addGITConfig(1,"GITPROD","StreamName","ProjectVersion","ProjectName","")
TFVC	Project.addTFVCConfig(int pSequenceNumber, String pInstanceName) Project.addTFVCConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Project.addTFVCConfig(int pSequenceNumber, String pInstanceName) Create a TFVC configuration for the project based on a pre-configured SCM instance code for TFVC. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script will be populated from the Project TFVC Setup Defaults. For example, Project.addTFVCConfig(1,"TFVCPROD") Project.addTFVCConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Create a TFVC configuration for the project based on a pre-configured SCM instance code for TFVC. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script provided on the method will overwrite the values from the Project TFVC Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addTFVCConfig(1,"TFVCPROD","\"\\\$/\" + ProjectName + \"/main\"","\"\\\$/\" + ProjectName + \"/\" + StreamAttribute1","ProjectName + ProjectVersion","")
PERF	Project.addPERFConfig(int pSequenceNumber, String pInstanceName) Project.addPERFConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Project.addPERFConfig(int pSequenceNumber, String pInstanceName) Create a PERF configuration for the project based on a pre-configured SCM instance code for PERF. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script will be populated from the Project PERF Setup Defaults. For example, Project.addPERFConfig(1,"PERFPROD") Project.addPERFConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Create a PERF configuration for the project based on a pre-configured SCM instance code for PERF. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script provided on the method will overwrite the values from the Project PERF Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addPERFConfig(1,"PERFPROD","\"//StreamsDepot/\" + ProjectName","\"//StreamsDepot/\" + ProjectName","ProjectName + \"-\" + ProjectVersion","")
CVS	Project.addCVSConfig(int pSequenceNumber, String pInstanceName) Project.addCVSConfig(int pSequenceNumber, String pInstanceName, String pModuleNameScript, String pBranchNameScript, String pTagScript, String pCheckoutFolderScript) Project.addCVSConfig(int pSequenceNumber, String pInstanceName) Create a CVS configuration for the project based on a pre-configured SCM instance code for CVS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Module Name Script, Branch Name Script, Tag Script and Checkout Folder Script will be populated from the Project CVS Setup Defaults. For example, Project.addCVSConfig(1,"CVSPROD") Project.addCVSConfig(int pSequenceNumber, String pInstanceName, String pModuleNameScript, String pBranchNameScript, String pTagScript, String pCheckoutFolderScript) Create a CVS configuration for the project based on a pre-configured SCM instance code for CVS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Module Name Script, Branch Name Script, Tag Script and Checkout Folder Script provided on the method will overwrite the values from the Project CVS Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addCVSConfig(1,"CVSPROD","ProjectName","StreamName","\"R\" + ProjectVersion.replace(\".\",\"_\")","")
CCUCM	Project.addCCUCMConfig(int pSequenceNumber, String pInstanceName) Project.addCCUCMConfig(int pSequenceNumber, String pInstanceName, String pProjectVobScript, String pVobPathsScript, String pStreamScript, String pLabelNameScript, String pCheckoutFolderScript) Project.addCCUCMConfig(int pSequenceNumber, String pInstanceName) Create a CCUCM configuration for the project based on a pre-configured SCM instance code for CCUCM. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project VOB Script, VOB Path Script, Stream Script, Label Name Script, and Checkout Folder Script will be populated from the Project CCUCM Setup Defaults. For example, Project.addCCUCMConfig(1,"CCUCMPROD") Project.addCCUCMConfig(int pSequenceNumber, String pInstanceName, String pProjectVobScript, String pVobPathsScript, String pStreamScript, String pLabelNameScript, String pCheckoutFolderScript) Create a CCUCM configuration for the project based on a pre-configured SCM instance code for CCUCM. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project VOB Script, VOB Path Script, Stream Script, Label Name Script, and Checkout Folder Script provided on the method will overwrite the values from the Project CCUCM Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addCCUCMConfig(1,"CCUCMPROD","\"\"","\"\"","StreamName","\"FD_\" + ProjectName +\"_\"+StreamName","")
PVCS	Project.addPVCSConfig(int pSequenceNumber, String pInstanceName) Project.addPVCSConfig(int pSequenceNumber, String pInstanceName, String pProjectPathScript, String pPromotionGroupScript, String pUsingPGScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Project.addPVCSConfig(int pSequenceNumber, String pInstanceName) Create a PVCS configuration for the project based on a pre-configured SCM instance code for PVCS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project Path Script, Promotion Group Script UsingPGScript, Branch Path Script, Label Name Script, and Checkout Folder Script will be populated from the Project PVCS Setup Defaults. For example, Project.addPVCSConfig(1,"PVCSPROD") Project.addPVCSConfig(int pSequenceNumber, String pInstanceName, , String pProjectPathScript, String pPromotionGroupScript, String pUsingPGScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript) Create a PVCS configuration for the project based on a pre-configured SCM instance code for PVCS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project Path Script, Promotion Group Script UsingPGScript, Branch Path Script, Label Name Script, and Checkout Folder Script provided on the method will overwrite the values from the Project PVCS Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas. For example, Project.addPVCSConfig(1,"PVCSPROD","\"/\"+ProjectName","StreamAttribute1","\"\"","\"true\"","ProjectName + ProjectVersion","")

Continuous Integration Methods

//These methods add Continuous Integration into your project.
putYourVariableNameHere = Project.addPollSCMTrigger(int pIntervalMinutes, String pStreamName, String pEnvironmentName)
putYourVariableNameHere = Project.addScheduledBuildTrigger(String pCronExpression, String pStreamName, String pEnvironment)
putYourVariableNameHere = Project.addScheduledDeployTrigger(String pCronExpression, String pStreamName, String pEnvironment)
putYourVariableNameHere = Project.addPostBuildTrigger(String pStreamName, String pEnvironment)

// The following methods are available on the object returned from the methods above so inputs and Flexfields can be added to the trigger.
putYourVariableNameHere.addFlexField(String pFlexFieldName, String pValue)
putYourVariableNameHere.addInput(String pInputName, String pValue) 

//For example, to add a Poll SCM trigger with a FlexField and an input, you would write code like this. trigger1 is a variable, its name isn't important, but must match.
trigger1 = Project.addPollSCMTrigger(5, "trunk", "DEV01")
trigger1.addFlexField("Change_Number", "Built by CI Poll SCM")
trigger1.addInput("input", "Built by CI Poll SCM")

Browser not supported