...

Method Required Description

Project.setProjectPath(String pProjectPath)

Yes

Set Project path. For example. FlexDeploy/SOA/HR. In this example, SOA folder will be created if it does not exist and HR application will be created if it does not exist.

You must make sure that you are defining last element in Project Path consistently as Application. For example, along with above example FlexDeploy/SOA/HR, if you used path as FlexDeploy/SOA/HR/Application, you will have issues.

Project.setProjectName(String pProjectName) Yes Set Project Name.

Project.setDeployPriority(Integer pDeployPriority) Yes Set Project Priority. If not supplied 1 is used.

Project.setDeployPriorityScope(String pDeployPriorityScope) Yes Defaults to Application. Possible values are Application, Folder, Global.

Project.setDescription(String pDescription) Yes

Project.setProjectClassification(String pClassification) No Classification for this project. Possible values are Standard, PartialDeployments, Container, Utility. Default is Standard.

Project.setProjectType(String) No Required if partial deployment project. Examples are GENERAL, EBS, PARTIAL_FILE, PARTIAL_JDBC, OracleForms, ORACLE_DB, ORACLE_BI, ORACLE_APEX, MFT, SALESFORCE, UTILITY, MDS, SAP, OSB, GENERIC

Project.addProperty(String pPropertyName, Object pPropertyValue)

YesNo

This depends on type of Project being created. For example,

Code Block

language	groovy

// using hard coded partition name as default.
Project.addProperty("FDSOA_PARTITION", "default");

// Using Input PartitionName. Each project can specify different partition
Project.addProperty("FDSOA_PARTITION", PartitionName);

Project.addProperty("FDSOA_OVERWRITE_REVISION", false);

Project.addProperty("FDSOA_MAKE_DEFAULT_REVISION", true);

Project.addProperty(String pPropertyName, Object pPropertyValue, boolean pExpression) No Same as above method, except you can specify whether Property Value is expression or not by using boolean parameter.

Project.setActive(boolean pActive) No Default would be true.

Project.setWebhooksEnabled(boolean pWebhookEnabled) No Enables or disables webhook enabled flag for project. This was added in 5.3.0.2

Project.setProjectBuildSequence(Long pSequenceNumber) No @since 5.4.0.2 Set the initial value for the ProjectBuildSequence variable which can be used in stream syntax scripts. Defaults to 1 if not set.

Change default stream name.

No

This must be done prior to adding any Stream.

Project.getStreams().get(0).setStreamName("master");

Workflow Methods

Method	Required	Description
Project.setBuildWorkflowName(String pBuildWorkflowName)	Yes	Set Build Workflow name to be used by Project.
Project.setDeployWorkflowName(String pDeployWorkflowName)	Yes	Set Deploy Workflow name to be used by Project.

...

Source Control Configuration Methods

SCM Type

Use one of the two options shown below.

Method	Required	Description
Project.setSCMType(pSCMType)	No	Set SCM Type or use Project Defaults. Possible values are SVNCVS, FILE, GIT, TFVCNONE, PERF, CVSPVCS, PERFSVN, CCUCMTFVC, PVCSOIC.

setCCUCMForSCM ClearCase UCM

Method	Required	Description
Project.setSVNForSCM()	No	Call to use Subversion for Project.
Project.setGITForSCM()	No	Call to use Git for Project.
Project.setTFVCForSCM()	No	Call to use Microsoft TFVC for Project.
Project.setCVSForSCM()	No	Call to use CVS for Project.
Project.setPERFForSCM()	No	Call to use Perforce for Project.
Project.	setPVCSForSCM()	No	Call to use	PVCS for Project.
Project.setPVCSForSCMsetFILEForSCM()	No	Call to use PVCS for ProjectFile System SCM type for project.

Stream Settings

Add additional project streams if necessary. These streams are what the int pSequenceNumber in the SCM details section below refer to.

Code Block

language	groovy

Project.createStreamFromMainStream(String pStreamName)

Project.createStream(String pStreamName, String pVersionSyntaxScript)
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription)
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3) 
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3, Long pSequenceNumber)

Method	Required	Description
Project.createStreamFromMainStream(String pStreamName)	No	Create a copy of the main stream with a new name. The main stream is generated from default configurations. For example, Project.createStreamFromMainStream("branch1")
Project.createStream(String pStreamName, String pVersionSyntaxScript)	No	Create an additional stream based on the inputs. Description, Attribute1, Attribute2 and Attribute3 will be defaulted to blank entries. For example, Project.createStream("branch1", "\"1.0")
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription)	No	Create an additional stream based on the inputs. Attribute1, Attribute2 and Attribute3 will be default to blank entries. For example, Project.createStream("branch1", "\"1.0", "March release")
Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3)	No	Create an additional stream based on the inputs. The attribute values can be further utilized in different path scripts during SCM configurations below. For example, Project.createStream("branch1", "\"1.0", "March release","attr1","", "")
@since 5.4.0.2 Project.createStream(String pStreamName, String pVersionSyntaxScript, String pDescription, String pAttribute1, String pAttribute2, String pAttribute3, Long pSequenceNumber)	No	Create an additional stream based on the inputs. The attribute values can be further utilized in different path scripts during SCM configurations below. For example, Project.createStream("branch1", "\"1.0", "March release","attr1","", "", 10)

SCM Details

Next, configure the SCM details for your selected SCM Type. Choose one of the methods that contains the options that you need to configure for your projects from the list.

If SCM Defaults are setup under Administration → Defaults, these may be unnecessary.

SCM Type

Supported Methods

SVN

Code Block
Project.addSVNConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.addSVNConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pTrunkPathScript, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory)

Project.addSVNConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)

Project.addSVNConfig(1,"SVNPROD")

Project.addSVNConfig(1,"SVNPROD","\"/trunk/\" + ProjectName","\"/branches/\" + StreamName + \"/\" + ProjectName","","")

Create a SVN configuration for the project based on a pre-configured SCM instance code for SVN. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Trunk Path Script, Branch Path Script,

TagPathScript

Tag Path Script and Checkout Directory will be populated from the Project SVN Setup Defaults.

For example,

Project.addSVNConfig(

1,"SVNPROD")Project.addSVNConfig(

int pSequenceNumber, String

pInstanceCode

pInstanceName, String pTrunkPathScript, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory)

Create a SVN configuration for the project based on a pre-configured SCM instance code for SVN. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Trunk Path Script, Branch Path Script,

TagPathScript

Tag Path Script and Checkout Directory provided on the method will overwrite the values from the Project SVN Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addSVNConfig(1,"SVNPROD","\"/trunk/\" + ProjectName","\"/branches/\" + StreamName + \"/\" + ProjectName","","")

GIT

Code Block
Project.addGITConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.addGITConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory, String pSparseCheckoutFoldersScript)

Project.addGITConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)

Create a GIT configuration for the project based on a pre-configured SCM instance code for GIT. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Branch Path Script,

TagPathScript

Tag Path Script, Checkout Directory and

SparseCheckoutFoldersScript

Sparse Checkout Folders Script will be populated from the Project GIT Setup Defaults.

For example,

Project.addGITConfig(1,"GITPROD")

Project.addGITConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pBranchPathScript, String pTagPathScript, String pCheckoutDirectory, String pSparseCheckoutFoldersScript)

Create a GIT configuration for the project based on a pre-configured SCM instance code for GIT. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Branch Path Script,

TagPathScript

Tag Path Script, Checkout Directory and

SparseCheckoutFoldersScript

Sparse Checkout Folders Script provided on the method will overwrite the values from the Project GIT Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addGITConfig(1,"GITPROD","StreamName","ProjectVersion","ProjectName","")

TFVC

Code Block
Project.addTFVCConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.addTFVCConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript)

Project.addTFVCConfig(int pSequenceNumber, String pInstanceName)

Create a TFVC configuration for the project based on a pre-configured SCM instance code for TFVC. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script will be populated from the Project TFVC Setup Defaults.

For example,

Project.addTFVCConfig(1,"TFVCPROD")

Project.addTFVCConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript)

Create a TFVC configuration for the project based on a pre-configured SCM instance code for TFVC. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script provided on the method will overwrite the values from the Project TFVC Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addTFVCConfig(1,"TFVCPROD","\"\\\$/\" + ProjectName + \"/main\"","\"\\\$/\" + ProjectName + \"/\" + StreamAttribute1","ProjectName + ProjectVersion","")

PERF

Code Block
Project.addPERFConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.addPERFConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript)

Project.addPERFConfig(int pSequenceNumber, String pInstanceName)

Create a PERF configuration for the project based on a pre-configured SCM instance code for PERF. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script will be populated from the Project PERF Setup Defaults.

For example,

Project.addPERFConfig(1,"PERFPROD")

Project.addPERFConfig(int pSequenceNumber, String pInstanceName, String pMainPathScript, String pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript)

Create a PERF configuration for the project based on a pre-configured SCM instance code for PERF. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Main Path Script, Branch Path Script, Label Name Script and Checkout Folder Script provided on the method will overwrite the values from the Project PERF Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addPERFConfig(1,"PERFPROD","\"//StreamsDepot/\" + ProjectName","\"//StreamsDepot/\" + ProjectName","ProjectName + \"-\" + ProjectVersion","")

CVS

Code Block
Project.addCVSConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.addCVSConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pModuleNameScript, String pBranchNameScript, String pTagScript, String

pCheckoutFolderScript)CCUCM

pCheckoutFolderScript)

Project.addCVSConfig(int pSequenceNumber, String pInstanceName)

Create a CVS configuration for the project based on a pre-configured SCM instance code for CVS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Module Name Script, Branch Name Script, Tag Script and Checkout Folder Script will be populated from the Project CVS Setup Defaults.

For example,

Project.addCVSConfig(1,"CVSPROD")

Project.addCVSConfig(int pSequenceNumber, String pInstanceName, String pModuleNameScript, String pBranchNameScript, String pTagScript, String pCheckoutFolderScript)

Create a CVS configuration for the project based on a pre-configured SCM instance code for CVS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Module Name Script, Branch Name Script, Tag Script and Checkout Folder Script provided on the method will overwrite the values from the Project CVS Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addCVSConfig(1,"CVSPROD","ProjectName","StreamName","\"R\" + ProjectVersion.replace(\".\",\"_\")","")

PVCS

Code Block
Project.

addCCUCMConfig

addPVCSConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName)
Project.

addCCUCMConfig

addPVCSConfig(int pSequenceNumber, String

pInstanceCode

pInstanceName, String pProjectPathScript, String

pProjectVobScript

pPromotionGroupScript, String

pVobPathsScript

pUsingPGScript, String

pStreamScript

pBranchPathScript, String pLabelNameScript, String pCheckoutFolderScript)

Project.addPVCSConfig(int pSequenceNumber, String pInstanceName)

Create a PVCS configuration for the project based on a pre-configured SCM instance code for PVCS

code

. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project Path Script, Promotion Group Script UsingPGScript, Branch Path Script, Label Name Script, and Checkout Folder Script will be populated from the Project PVCS Setup Defaults.

For example,

Project.addPVCSConfig(

int pSequenceNumber, String pInstanceCode)

1,"PVCSPROD")

Project.addPVCSConfig(int

pSequenceNumber,

String

pInstanceCode

pInstanceName, ,

String

pProjectPathScript,

String

pPromotionGroupScript,

String

pUsingPGScript,

String

pBranchPathScript,

String

pLabelNameScript,

String

pCheckoutFolderScript

pCheckoutFolderScript)

Create a PVCS configuration for the project based on a pre-configured SCM instance code for PVCS. The sequence number allows you to create multiple configurations per project (sequencing starts at 1). The values for Project Path Script, Promotion Group Script UsingPGScript, Branch Path Script, Label Name Script, and Checkout Folder Script provided on the method will overwrite the values from the Project PVCS Setup Defaults. Passing in an empty string will not override the given default value. ProjectName and StreamName are available variables within project configuration that can be used to make generic formulas.

For example,

Project.addPVCSConfig(1,"PVCSPROD","\"/\"+ProjectName","StreamAttribute1","\"\"","\"true\"","ProjectName + ProjectVersion","")

Continuous Integration Methods

...

Versions Compared

Old Version 36

New Version Current

Key

Workflow Methods

Source Control Configuration Methods

SCM Type

Stream Settings

SCM Details

Continuous Integration Methods

Page Comparison

Versions Compared

Old Version 36

New Version Current

Key

Workflow Methods

Source Control Configuration Methods

SCM Type

Stream Settings

SCM Details

Continuous Integration Methods